Our Products
Avionics Systems
Home > Our Products > Avionics Systems > Ground Communication Interface Unit
OUR PRODUCTS
Ground Communication Interface Unit
The Ground Communication Interface is a flexible and reconfigurable system that, although they have the same hardware components, may differ in their basic functions because of their configuration in different configurations. An equipment complies with the electrical/mechanical standards of avionics systems that perform signal processor, data concentrator and protocol converter functions.
The Ground Interface unit is capable of compressing the video data it receives with SD interfaces in accordance with H.264/MPEG-4 Part 10 Link Communication Interface (LINK-HAU) and transmitting the compressed video data it receives with ethernet interfaces to the monitors Ground Control Station Interface (YKI-HAU), serial interfaces (RS422 It is the unit that can convert Ethernet UDP protocol to serial interface (RS422). YER-HAU is the common name of YKI-HAU and LINK-HAU units.
Ground Control Station Communication Interface; It is the unit that works as a backup at the ground control station and that will allow communication with the Link Communication Interface units in the Link units. This communication can be managed through the management software via the management computer.
- 2 x Gigabit Ethernet Interface
- 8 x Fast Ethernet Interface
- 2 x SD Video Input
- 8 x RS422 Interface
- Working at -55 °C / +55 °C
- Self-heating at Low Temperatures
- H.264 / MPEG-4 Part 10 to Video Compression
- ESD Protection
- Compliance with EMI / EMC Tests
- Ability to Operate in 12V / 36V Voltage Range
- Protection Against High and Reverse Voltage
- Configurable via Ethernet
- BIT Logging Feature for Subunits
- Can be Used as L2 Managed Switch
- Static Routing
- Protocol Conversion
- Network Access at L3 Level (Gateway, Subnet)
- Port-based Packet Filtering (UDP Destination Port)
- Match / Separation Mechanism (YKI-HAU)
- 2 x Gigabit Ethernet Interface
- 8 x Fast Ethernet Interface
- 2 x SD Video Input
- 8 x RS422 Interface
- Working at -55 °C / +55 °C
- Self-heating at Low Temperatures
- H.264 / MPEG-4 Part 10 to Video Compression
- ESD Protection
- Compliance with EMI / EMC Tests
- Ability to Operate in 12V / 36V Voltage Range
- Protection Against High and Reverse Voltage
- Configurable via Ethernet
- BIT Logging Feature for Subunits
- Can be used as L2 Managed Switch
- Static Routing
- Protocol Conversion
- Network Access at L3 Level (Gateway, Subnet)
- Port and Device Redundancy Scenario
- Video Output Switching / Multiplexing
- Match / Separation Mechanism (HAU-UBB ,LINK-HAU)
